How to fill your air rifle using a 300 bar cylinder bottle
Transcript
Hello again, I'm Ben for the airgun centre and I'm going to be giving you a quick demonstration of how to fill up your rifle using a 300 bar cylinder.
bear in mind, every manufacturer is going
to have a different charging adapter I'm
going to demonstrate the fill procedure
with the BSA charging adapter right
first thing push your adapter into the
hole at the end of your rifle like so
make sure it's seated properly now I'll take
you to the bottle. Alright this is
important this is the blade valve so you
must sort tighten that up and shut the valve
off. Give it a good nip up and then very
gently, checking before you do this
which fill pressure the rifle
fills to. It just so happens this fills to
200 bar now very gently
open the valve until you get to your
desired fill pressure like so shut the
valve off and then before you take the
fill probe out of the rifle you must
release the bleed valve because at the
moment there's 200 bar of pressure
trapped in the hose and if you pull it
out it'll make a big bang and scare the hell
out of you. Pull your adapter out
and there you go your gun's filled
3 Litre 300 Bar Air Rifle Filling Kit (PCP Charging Kit) Overview
Here's an overview of the 3 Litre 300 Bar Air Rifle Filling Kit (PCP Charging Kit):
| Price | £189.99 |
|---|
5 Litre 300 Bar Air Rifle Filling Kit (PCP Charging Kit) Overview
Here's an overview of the 5 Litre 300 Bar Air Rifle Filling Kit (PCP Charging Kit):
| Price | £209.99 |
|---|
7 Litre 300 Bar Air Rifle Filling Kit (PCP Charging Kit) Overview
Here's an overview of the 7 Litre 300 Bar Air Rifle Filling Kit (PCP Charging Kit):
| Price | £239.99 |
|---|
